SuperCut 100

SuperCut 100

The SuperCut 100 is a compact saw unit developed in collaboration with machine manufacturers specifically for integration with harvester heads. This means that the SuperCut 100 is sold only to machine manufacturers and not as an aftermarket accessory. The SuperCut 100 is condensed high technology for installation in the crane tip for professional forestry use in double shifts. So the focus is on optimizing its weight, power, and saw performance.

The SuperCut 100 is also fitted as standard in our SuperSaw 350E grapple saw, where it ensures a high cutting capacity to weight ratio.

No snow compaction

In winter, snow compaction can cause problems for a saw unit. The SuperCut 100 has an integrated and protected feed cylinder located in a separate plane to the bar and tensioning unit, which drastically reduces the risk of snow compaction. The SuperCut 100 has a 95-degree feed angle.

Available in many versions

The SuperCut 100 is comprised of several different modules, which enables it to be assembled in a number of ways. The motor size, drive sprocket size, cut control, lubricant volume, and even chain type can be varied.

Sophisticated cut control

The cut control on the SuperCut 100 is typically specified by the machine manufacturer, so that the signaling matches the machine’s control system. Today, we supply a number of variants, ranging from a simple bar home inductive sensor to encoders. One major advantage of the SuperCut 100 is that the saw bar feed out is based on a rack and pinion solution. This means the feed has a constant lever arm, which makes it very easy for the harvester's control system to regulate the feed force. A conventional feed using a regular cylinder provides a variable lever arm, which complicates matters for the control unit.

Many options

The SuperCut 100 comes as standard with a number of essential features, such as automatic chain tensioning, integrated and proportional chain lubrication, completely sealed bearings, and a saw motor swivel for the tensioner and chain oil. This means no need for hose routing in the saw box. Options include a saw bar holder for root protection (urea). Both the tensioner and the saw bar holder can be supplied hardened.

SuperCut 100
SuperCut 100
SuperCut 100

compare the models

SC 100 10cm3

SC 100 10cm3

SC 100 14cm3

SC 100 14cm3

SC 100 19cm3

SC 100 19cm3

SC 100 30 cm3

SC 100 30 cm3

SC 100 20cm3

SC 100 20cm3

SC 100 25cm3

SC 100 25cm3

SC 100 32cm3

SC 100 32cm3

Technical specifications

10cc Parker 14cc Parker 19cc Parker 30cc Parker 20cc Bucher 25cc Bucher 32cc Bucher Saw motor displacement cm3 10 14 19 30 20 25 32 Weight incl. saw motor kg 32 32 35 37 38 38 38 Min. working pressure MPa See recommendations from motor manufacturer Min. oil flow l/min See recommendations from motor manufacturer Prop. chain lubrication ml 1,6–6,5 1,6–6,5 1,6–6,5 1,6–6,5 1,6–6,5 1,6–6,5 1,6–6,5 Saw bar, max. length cm 90 90 90 90 90 90 90 Height motor mm 93 93 120 137 112,5 112,5 112,5 Max. height cut control mm 126 126 126 126 126 126 126 Max. height mm 190 156–190 156–190 156–190 156–190 156–190 156–190 Total length mm 608 608 608 608 608 608 608 Max. length bar holder mm 160 160 160 160 160 160 160 Length, F mm 147 147 147 147 147 147 147 Width, G mm 214 214 214 214 214 214 214 Saw chain inch .404" .404" .404" .404" .404" .404" .404" Max. saw chain speed See recommendations from saw chain manufacturer Max. power to saw chain See recommendations from saw chain manufacturer

follow us

Contact us

Do you want to contact someone at Hultdins or pay us a visit?

Find our contact information here