The SuperGrip II-S is the strongest grapple in the SuperGrip II series. Use it for heavier forwarding or mount it on an excavator for lighter work.
With the SuperGrip II-S, we feel that we’ve achieved a good balance between strength and weight. It’s lighter than the SuperGrip -S, yet still stronger than a standard grapple.
The difference in weight between the standard model and the S-model in the SuperGrip series is pretty big. So we’ve made the S-model of the SuperGrip II slightly lighter. It’s thoroughly reinforced, but not quite as heavy. Our aim with the SuperGrip II-S is, as usual, to make you as productive as possible when working on heavier jobs.
The frame of the SuperGrip II-S is extra reinforced where it’s needed the most: around the rotator mount. To achieve the best weight-to-strength ratio, Hardox plates with side supports are welded to the S-model’s frame. We’ve also used generous diameters for the pins and bushings to ensure optimal force distribution where the reinforced arms connect with the frame. Naturally, expander pins with an internal taper are used, and even the S-model of the SuperGrip II is equipped with steel bushings.
Grapple Area 0.26 m2
Max. Load 3 500 kg
Weight 200 kg
Grapple Area 0.30 m2
Max. Load 3 500 kg
Weight 205 kg
Grapple Area 0.36 m2
Max. Load 6 000 kg
Weight 326 kg
Grapple Area 0.42 m2
Max. Load 7 000 kg
Weight 370 kg
Grapple Area 0.52 m2
Max. Load 7 000 kg
Weight 406 kg
Do you want to contact someone at Hultdins or pay us a visit?
